Type 300

Type 300 is the bike that marries optimal aerodynamics with absolute riding comfort; the two are not mutually exclusive.

The development road has been long, but perfection isn't created overnight. Geometry changes, material optimisation and usability were the major areas for development since the reveal of our T300 Prototype.

Type 300 Highlights:

• 53mm measured tyre clearance front and rear
• UDH compatibility
• Standard road width BB for standard Q factor (PF30 79-A/BBRight)
• Clearance for 50T chainring
• M40J and T800 carbon fibre laminate

This is bike is made for elevating your off-road riding experience; whether that's more speed, more comfort or just more enjoyment.

All REAP bikes are made to order at our factory in Stoke-on-Trent, England, and take 3-4 weeks to create before shipping.

That allows us to specify every last detail of your bike. Type 300 is shipped with our REAP Aero two-piece cockpit; available in sizes 36cm to 42cm, all with a 15mm flare on each side, and stems from 90mm to 140mm.

Riders can select all parts including crank length, chainring size, cassette ratio, and more; this is your bike, for your riding. See below for groupset breakdowns.

You will be contacted after purchase to finalise the available options, but feel free to reach out to us here to discuss with our team before purchase if you require assistance.

SRAM Force AXS XPLR

• Shifter/Calliper Sets - Force E1
• Rear Derailleur - Force E1 XPLR 13s
• Chainset - Force E1 DUB Powermeter
• Chain - Force E1, Silver 12/13s
• Cassette - Force E1 XPLR, 10-46T
• Rotors - Paceline, 160mm F&R
• Wheelset - Parcours FKT
• Tyres - Panaracer Gravel King X1 TLR, 45mm

SRAM Red AXS XPLR

• Shifter/Calliper Sets - Red AXS E1
• Rear Derailleur - Red AXS E1 XPLR 13s
• Chainset - Red E1 DUB Powermeter
• Chain - Red E1, Silver 12/13s
• Cassette - Red E1 XPLR, 10-46T
• Rotors - Centerline X, 160mm F&R
• Wheelset - Parcours FKT
• Tyres - Panaracer Gravel King X1 TLR, 45mm

Note: All variables can be specified by the rider, e.g. chainring size, tyre width, etc.

Frameset Only

• Frame
• Fork
• Handlebar (size to be specified)
• Stem (size to be specified)
• Seatpost
• Carbon-Ti X-Lock Evo - M12x1.0 Rear, M12x1.5 Front

Please contact us here for help finding your correct size if you need assistance.

Our frame and fork geometry chart for the Type 300 is shown below. All Type 300 framesets and builds are shipped with a REAP Aero cockpit. The handlebars of this cockpit are available as 36cm, 38cm, 40cm or 42cm; all have a 1.5cm flare either side. The stem lengths available are from 90-140mm.